A rainwear label might say “20,000” or “30,000” for breathability. If the units or test methods differ, the higher number may not mean you feel less clammy.
Here is what breathability and hydrostatic head ratings measure and how to compare rainwear for your route.
What a breathability rating measures
Water vapor transmission measures how much vapor passes through fabric under specific test conditions. Catalogs often express it as the mass per square meter scaled to 24 hours (g/m²/24h). This is a lab measurement, not a measurement of sweat during 24 hours of wear.
JIS L 1099 includes methods A-1 (calcium chloride) and B-1 (potassium acetate). They use different moisture-absorbing substances, test setups, temperatures, and humidity levels. The same fabric can give different results. There is no universal conversion between the methods.
Check the method and unit first. Compare numbers only when the method and conditions match, even if the units are the same. If the test method is unclear, consider the manufacturer's intended use, ventilation, and how the garment feels.
Read the hydrostatic head rating too
Consider water vapor transmission alongside resistance to water penetration.
Hydrostatic head measures the fabric's resistance to water penetration under pressure. It may be shown as an equivalent height of a column of water in millimeters. There is no direct conversion to rain intensity. Seams and zippers also affect the waterproofing of the finished garment.
Hydrostatic head and vapor transmission measure different properties. Materials and laminate construction affect both. Check each rating on its own.
For example, some manufacturers list fabric with at least 20,000 mm of hydrostatic head alongside a JIS L 1099 B-1 result. This helps compare fabrics tested the same way. For long exposure to wind and rain, check how seams are sealed and how the hood and cuffs adjust too.
Why garments with similar ratings can feel different
Two jackets can have similar ratings and still feel different. Three things help explain why.
Construction: a three-layer laminate bonds the face fabric, waterproof layer, and backing together. Some two-layer garments use a separate lining, and 2.5-layer constructions use a thin protective inner finish or similar layer. Layer count alone does not determine breathability or comfort.
Temperature and humidity inside and out: vapor transfer depends on the difference in water vapor pressure created by the temperature and humidity on both sides. Warm, humid air outside may make it harder for sweat vapor to escape. Sweat rate and ventilation affect how clammy you feel too.
Water repellency of the face fabric: when the durable water repellent finish (DWR) weakens and the face fabric soaks up water, it is called wetting out. A clammy or cold feeling inside does not by itself confirm a leak through the waterproof layer. Follow the garment's care label to clean it or restore the finish.
Use lab ratings to start comparing fabrics. For comfort on the trail, consider construction, weather, activity level, and ventilation together.
How to choose for different activities
What matters most depends on your effort and the conditions.
Ridges, traverses, and sustained exertion
On trips where you sweat heavily and face wind and rain, waterproofing, breathable fabric, and vents all matter. Check whether the vents and hood are easy to adjust with your pack on.
Woodland and low-mountain hikes
Even in woods or low mountains, heat, humidity, and pace change how much you sweat. For a short trip, you can compare weight, packability, and ventilation once you have the weather protection you need.
Long stops, belaying, or waiting
When you stop for a long time, warmth and protection from wind and rain matter alongside managing moisture. Check that you can move with warm layers underneath and use the hood and cuffs to keep the weather out.
Three checks before buying
Use these checks to narrow your choices.
- Check the test method: look for the method and unit in the official specifications. Compare numbers from the same method and conditions.
- Check waterproofing: look at hydrostatic head and the features that help keep rain and wind out, including seams, zippers, and the hood.
- Check construction, weight, and ventilation: compare the layers, weight, freedom of movement, and ventilation for how you'll use the garment.
What to do next
When you next choose rainwear, check the breathability test method, hydrostatic head, and construction first. Decide what matters most for the season, elevation, and time on the trail, including weather protection and ventilation. You can use Nordwand's partner shop search to find a nearby outdoor shop, try the shell over your other layers, and ask for advice.