Japanese hiking maps and guidebooks often refer to grading. The system gives separate grades for physical effort and technical difficulty. Understanding the numbers and letters helps you choose a route that fits.
A route grade describes physical demands and technical requirements on separate scales. Nagano and Shizuoka use a shared approach, while the Ministry of the Environment’s Yakushima World Heritage Center publishes guidance for its own area. Check the publisher and legend when comparing grades.
This guide explains both axes, how to use them and what to watch for when one grade is low and the other high.
What the physical grade measures
The physical grade estimates the endurance and exertion needed to complete a route. In Nagano and Shizuoka, the rating calculation uses four inputs: standard walking time, route distance, cumulative ascent and cumulative descent.
In those systems, the physical grade runs from 1 to 10. Higher numbers mean greater physical demands. Other tables may use different scales, so read the legend.
Cumulative ascent can be easy to miss. It is the total height you climb across all the ups and downs. A route along an undulating ridge can accumulate considerable climbing even if the peak is low, raising its physical grade.
What the technical grade measures
The technical grade describes the skills, experience and equipment needed to hike the route safely. It considers rocky and chain-assisted sections, how easy the path is to follow, stream crossings and whether you need to navigate with a map and compass.
Nagano and Shizuoka use A to E, with A the least technically demanding and E the most. Grades A and B still require care with footing and navigation. At C and above, check the exact skills the route calls for, including how to handle rock, fixed chains and sections where the trail is unclear.
Fitness alone does not prepare you for technical ground. For example, if you have not practised keeping three points of contact on rock, a chain-assisted section on a C route can put you at risk. That is why the two grades are worth reading separately.
How to read the two grades together
Read them as a pair, for example physical grade 3 and technical grade B. Different combinations can lead to different beginner mistakes.
Low physical effort with high technical difficulty, such as 1C or 2D, deserves particular care. The route may be short, but it packs in difficult terrain. Assuming a short outing will be easy can leave you stuck on the rock.
High physical effort with low technical difficulty, such as 4A, may mean a maintained path with few technical obstacles and many hours or kilometres on foot. Without sufficient endurance, you may strain your knees or ankles on the way down.
With little experience, start with physical grade 1 or 2 and technical grade A or B, then raise one axis at a time. Changing both at once makes it harder to tell which demands are causing trouble.
Check the conditions the grades assume
Grades apply under stated conditions. Nagano and Shizuoka generally assume good weather and snow-free ground. The same route can become much harder when conditions change.
- Lingering snow or snow cover: assess the snow and slope separately. Using crampons or an ice axe may be necessary.
- Rain or high water: wet rocks offer less grip and stream crossings become hazardous.
- Sunset and darkness: reduced visibility can increase the technical demands even if the distance stays the same.
If the table says summer or snow-free conditions, use it in that context. For an outing outside those conditions, check with the local authority or a mountain organisation.
The technical grade often reflects the hardest section rather than an average. One chain-assisted obstacle may determine the grade of an otherwise straightforward route. Find out where the hardest section is before leaving.
Matching the grades to your skills
Start by checking your current experience and fitness.
- Review recent hikes. Look up the physical and technical grades of the last route you walked. Think about whether you had energy in reserve or found it hard.
- Find the table for your next mountain. Use the table published by the prefecture or local authority. Look up the grades for the specific route.
- Check each axis separately. When narrowing your choices, consider the same grade or one step higher on one axis if your recent hikes have left a comfortable margin.
- Research the most difficult section. If the technical grade rises, check photos and descriptions from a guidebook or the organisation that manages the area to see what it requires.
- Recheck the weather, season and how you feel just before leaving. The grade describes the route itself. You still need to judge that day’s conditions. Consult the Japan Meteorological Agency or other official forecasts.
What to do next
Find the official grading table for the mountain you want to visit and check both grades. Look at what the hardest section actually involves, such as chains or a rocky ridge, so you can make a better decision on the day. Nordwand’s Base Camp lets you ask people who know the area about seasonal conditions a table cannot show.
References
- Ministry of the Environment, Yakushima World Heritage Center: choose by physical effort and difficulty
- Prefectural and regional mountain route grading tables