If your phone dies on a hike, you lose access to its maps and calls. A power bank gives you backup power. Download the maps to use without reception, and bring an independent way to check your position, such as a paper map and compass.
Usable energy from the same power bank varies with the device you connect and the temperature. This guide looks at choosing capacity for your trip length and preparing for cold.
Why batteries run down on the trail
Three main factors can change how quickly a battery runs down and how long it works.
First, location tracking and the screen draw power. Keeping the map open or recording a GPS track uses energy. Second, weak reception can make a phone use more power as it searches for a signal. Third, temperature affects runtime and charging. Cold can even make a device shut down. The effect depends on the model, settings and conditions.
Choosing capacity for the trip
Milliamp-hours (mAh) measure electric charge. Watt-hours (Wh) measure energy and let you compare devices with different voltages. For a nominal cell voltage of 3.7 V and 10,000 mAh, the rated energy is 10,000 ÷ 1,000 × 3.7 = 37 Wh.
Backup power for different trips
- Short day hike. Check how much charge your usual map use leaves. Consider a light power bank that leaves enough for descent and communication.
- Long day hike or ridge walk. Estimate how long the screen and track recording will be in use. Allow extra for cold and a late descent.
- Overnight hike or traverse. List the devices you need to charge, such as your phone and headlamp. Plan for the next reliable place to recharge, with a reserve.
Cell and USB output ratings in mAh describe different conditions. For example, one product lists 10,000 mAh and 37 Wh at the cell, and 5,500 mAh at 5 V at the output. Voltage conversion uses some energy. How many times you can recharge depends on the device, temperature and use.
Start with daily energy use × days between opportunities to recharge + a reserve for cold and delays. Before leaving, test how many recharges you get with the devices and cable you will bring.
Cold and how to deal with it
Cold can shorten runtime or temporarily stop a device working. A manufacturer may specify separate ranges for operation and charging. Apple, for example, specifies an ambient range of 0–35 °C for iPhone. Check each device you will bring.
Carry it close to the body
Carry it in a dry inside pocket or similar spot, away from exposed outer pockets. Protect it from hard knocks and pressure, and keep metal away from the connectors. Avoid warming it directly with a hand warmer or other heat source.
Choose where and when to charge
Find a dry place to stop safely and charge when both devices are within the manufacturer's charging conditions. Let equipment warm gradually if it is too cold and wait for the ports to dry. Stop charging and using anything swollen, damaged or unusually hot.
Check ports and charging standards
A USB-C socket alone cannot tell you whether it supports USB Power Delivery (PD) or at what speed. Check the power bank's output, what the device can accept, and the cable's rating. Test them together. The device may limit charging in the cold.
Balancing weight and capacity
Estimate how much energy you need, then compare the combined weight of the power bank and cable. Base it on the devices you use and what you want to keep in reserve for a delay.
A light model can suit a short day hike. For overnight trips, check whether the hut or other stop has charging. Turn the screen off when possible. Airplane mode can help on sections where you do not need a connection. Turn connectivity back on if you need to check in or call for help.
When comparing models, look at the Wh rating and weight together. Use the output rating and what you measured yourself to see whether it covers your needs with a reserve.
Checks before buying or using a power bank
Make these checks at home before you head out.
- Air travel rules. Under Japan's transport ministry guidance, power banks are limited to two per person in the cabin, each no more than 160 Wh. Keep them out of checked baggage. Protect each from short circuits, keep them within reach, and avoid charging them or using them to power other devices on board. Check the rules for your airline and connections before leaving.
- Charge and condition. Charge it before leaving, check the indicator, look for damage to the case and connectors, and check for manufacturer recalls.
- A compatible spare cable. If you need your devices on a long trip, carry a tested spare and keep it dry.
- Water protection. Check what the manufacturer's water resistance covers and how the ports are protected. Carry the power bank in a dry bag and wait for wet connectors to dry before charging.
Before your next hike
Test how many times your current power bank can charge the phone and other gear with the cable you will use. Allow a reserve based on the trip length, cold, and where you can recharge, and pack it somewhere dry. Nordwand’s partner shop finder can help you find a store where you can check the weight and ports in person.
References
- Japan Ministry of Land, Infrastructure, Transport and Tourism: power bank rules on flights
- Japan transport ministry: passenger guidance in English
- Japan National Institute of Technology and Evaluation: avoiding accidents with lithium-ion devices
- Apple: temperature and device battery performance
- Xiaomi: example specifications for cell and output capacity
- USB-IF: USB Power Delivery
- U.S. National Park Service: communication and power management while hiking